Sharp AR-M350U Service Manual page 182

46-10
Purpose Adjustment
Function (Content) Used to adjust the print density for each density
level (display value) in the copy mode
(binary-Text/Photo mode).
A desired reading density can be set for each
density level (display value).
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(Text/Photo mode)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 1 1. COPY START
1
2. EXP LEVEL
50 50
3. 1.0 4. 1.5
50 50
6. 2.5 7. 3.0
50 50
9. 4.0 10. 4.5
Select other than 0 - 2,
and press [START] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2),INPUT VALUE 0-99, AND PRESS START.
3. 1. 0
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0 4. 1.5
6. 2.5. 7. 3.0
9. 4.0 10. 4.5
1
50
5. 2.0
50
8. 3.5
11. 5.0
50
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
Press [START] key or
press [CUSTOME SETTING] key.
1
5. 2.0
8. 3.5
11. 5.0
AR-M350 SIMULATIONS 10-38
<List of set values 1>
0 Paper feed tray selection
1 Copy start (Default)
2 Exposure level selection
3 Exposure level 1.0
4 Exposure level 1.5
5 Exposure level 2.0
6 Exposure level 2.5
7 Exposure level 3.0
8 Exposure level 3.5
9 Exposure level 4.0
10 Exposure level 4.5
11 Exposure level 5.0
<List of display values 1>
Normal display
ERROR display Door open
Jam
paper empty
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
<List of set values 3>
3 Exposure level 1.0
4 Exposure level 1.5
5 Exposure level 2.0
6 Exposure level 2.5
7 Exposure level 3.0
8 Exposure level 3.5
9 Exposure level 4.0
10 Exposure level 4.5
11 Exposure level 5.0
NOW COPYING
DOOR OPEN.
JAM
PAPER EMPTY.