Sharp AR-M350U Service Manual page 166

22-6
Purpose Adjustment, setup, operation data output, check
(print)
Function (Content) Used to print the list of adjustments and setup
data (simulations, FAX soft switches, counters).
Section
Item Data
Operation/Procedure the selected data is displayed on the menu box.
SIMULATION 22-6
DATA PRINT MODE, SELECT SETTING,AND PRESS START.
0. TRAY SELECT
1. PRINT START
When "1" is selected,
press [START] key.
SIMULATION 22-6
DATA PRINT MODE.. EXECUTING...
0.TRAY SELECT
<List of display values>
0 TRAY SELECT auto only (no selection)
1 PRINT START
22-7
Purpose User data output, check (display)
Function (Content) Used to display the key operator code.
(Used when the customer has forgotten the key
operator code.)
Section
Item Data
Operation/Procedure The key operator code is displayed.
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
:AUTO ONLY
: 1
AR-M350 SIMULATIONS 10-22
22-8
Purpose
Function (Content)
Section
Item
Operation/Procedure The counter data below are displayed.
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
1
SCAN : ********
STAPLER : ********
STAMP : ********
<List of display value>
SPF Number of times of document feed
SCAN Number of times of scan
0
STAPLER Number of times of stapling
PUNCH Number of times of punching
STAMP Number of times of SPF finish stamp
22-9
Purpose
Function (Content)
Section
Item
Operation/Procedure The counter data below are displayed.
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ********
TRAY3 : ********
BPT : ********
<List of display values>
TRAY1 Use quantity of tray 1
TRAY2 Use quantity of tray 2 (Multi purpose tray)
TRAY3 Use quantity of tray 3/LCC left tray
(Common to Desk/LCC)
TRAY4 Use quantity of tray 4/LCC right tray (Desk/LCC)
BPT Use quantity of manual feed tray
ADU Use quantity of duplex paper feed
Adjustment, setup, operation data output, check
(display)
Used to check the number of times the staple,
and scanner (reading) unit.
Counter
PUNCH : ********
Adjustment, setup, operation data output, check
(display)
Used to check the number of times
(print quantity) of each paper feed section.
Paper feed
Counter
TRAY2 : ********
TRAY4 : ********
ADU : ********