Location Requirements - Konica Minolta Magicolor 3300 Installation Manual

Top View
B
Front View
E

Location Requirements

Locate your printer in a space with these characteristics...
On a hard, flat, stable, level (±5° or less slant at any point on the machine)
surface. A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level.
Close to an easily accessible grounded power supply (on an exclusively
dedicated power outlet) that meets printer specifications.
Near your computer—at the length 6.5'/2 m or less for an IEEE 1284
bidirectional parallel connection.
With enough space to allow adequate ventilation and easy servicing.
With an ambient temperature range of 50°–90° F/10°–32° C and relative
humidity range of 15%–85% (noncondensating).
At an altitude of 0–10,170'/0–3,100 m.
But away from...
Direct sunlight, heating and cooling sources, extreme temperature and
humidity changes, wind, dust, open flames, and items that can easily burn.
A connection to the same electrical circuit as high-current machines,
noise-generating equipment (such as a copier or air conditioner), and strong
magnetic or electromagnetic fields (such as a refrigerator).
Water, water pipes, liquid (drink) containers, and corrosive chemicals or
vapors, such as ammonia.
Small, loose metal parts, such as paper clips and staples.
Getting Acquainted with Your Printer
A
C
D
Side View
F
A 4"/100 mm
B 24"/600 mm
C 8"/200 mm
D 6"/150 mm
E 4"/100 mm
F 6"/150 mm
G 24"/600 mm
H 8"/200 mm
G
H
3