Consumables; Warranty Considerations - Konica Minolta Magicolor 3300 Installation Manual

Consumables

Attention
Consumable life is expressed in simplex letter/A4 pages at normal 5%
coverage in continuous printing. A duplex page is equivalent to two
simplex pages. The stated life expectancy of each consumable is based
on printing under specific operating conditions, such as media type and
size. The actual life expectancy will vary (or be reduced) depending on
these and other printing variables, including average print job size
(such as the average continuous four-page simplex or intermittent
one-page simplex jobs), ambient temperature, and humidity.
Description
Fuser unit
Imaging unit
Media feed roller(s) Replace when you replace the fuser unit. Three media
Toner cartridge
Transfer unit
Notes: Refer to the User's Guide for consumable life expectancies and replacement
information.

Warranty Considerations

Various factors can affect a printer's warranty, such as electrostatic damage,
unsupported consumables, and other actions listed on the following page.
Read your printer warranty carefully. For information about your warranty, go
to printer.konicaminolta.net/support, then click on the Answer Base.
If KONICA MINOLTA printer failure or damage is found to be directly attribut-
able to the use of non-KONICA MINOLTA approved consumables, print
media, and/or accessories, KONICA MINOLTA will not repair the printer free
of charge. In this case, standard time and material charges will be applied to
service your printer for that particular failure or damage.
30
Message Window Display/Remark(s)
REPLACE FUSER UNIT. Replace the media feed
roller(s) when you replace the fuser unit.
REPLACE IMAGING UNIT The imaging unit consists
of four OPCs and four developers.
feed rollers are included with the fuser unit. If you do
not have a high-capacity input feeder (HCIF), two of
the rollers do not need to be installed.
<COLOR> TONER EMPTY
REPLACE TRANSFER UNIT
Warranty Considerations