Konica Minolta Magicolor 3300 Installation Manual page 12

1
Open the printer's front cover (button A), and remove any tape.
2
Open the imaging unit cover.
3
Remove the imaging unit from its
protective bag.
4
Holding the imaging unit horizontally,
carefully pull the tabs straight out and
completely away from the unit.
Attention
Do not twist the tab as you are
pulling it. If any tab doesn't pull
completely out (you must be able to
see the circle imprinted on the end),
the imaging unit must be replaced.
5
Carefully remove the protective
cover.
8
2
1
A
Setting up Your Printer