ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual page 17

from Standard, Wilhelm Tel, Small world, Prelude, Love
is blue, Ashita, NO4, NO5, NO1, NO2, Fuga. Each time
you press the Change soft key, the phone rings with the
selected ring tone. Press the Save soft key or press ▼
to set the VIP tone.
6. If you set the VIP (Very Important Person) tone, when a
new call comes in, and the caller's number has already
been stored in the phonebook, the phone will ring with
the VIP tone selected. Use the same method as you set
the Ringer Tone. Press the Save soft key or press ▼ to
set the Keypad tone. (Additional information can be
found on page 49).
Other Ringer Alert Options: Strobe & Shaker / Only Shaker /
Only Strobe (#30) Your telephone incorporates several options
to alert you that the phone is ringing. The loud, adjustable
ringer as well as the bright strobe and optional bed shaker or
any combination of these allows you to customize the phone
to fit your needs.
Your phone is equipped with a bright strobe light that can flash
a very bright strobe when the phone rings. If you have selected
the strobe to be ON, it will flash on all volume levels.
Your phone is equipped with a 3.5mm vibrating alert jack for an
optional bed shaker (purchased separately) to alert you when
the phone is ringing. Simply plug it into the shaker jack and
place it between your mattress and box spring or under the
cushion of a chair. When the phone rings, the pad will vibrate
with each ring of the phone.
NOTE: Your ClearSounds® CSC1000 comes from the factory
preset to both Strobe & Shaker position. If you would like to
override the factory preset, simply change the selection on the
back of the phone (see Diagram 2).
17 – ENGLISH