ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual page 42

and held during the whole process.
2. Release the MEMO key to end the recording.
Screening Calls
1. When the answering machine answers the call, listen
while the caller leaves a message.
2. To speak to the caller, pick up the handset or press the
Speaker key.
The answering machine automatically stops recording when
you activate the handset or speakerphone.
TIP: Make sure the volume on the phone is set loud enough to
hear your incoming calls.
Incoming Message (ICM)
When a call is received and the TAM is ON, the machine will play
the outgoing message, and then perform message recording.
The process is as follows:
After N times ringing, the phone enters answer-record mode
automatically and starts to play the outgoing message. The
caller can record after the tone.
To play the messages, press the Start Message key [►▌■]. The
speakerphone will announce "You have N new message(s)"
or "You have N old message(s)". The messages will be played
one by one. During the process you can perform the following
steps:
DEL
Press the [
Press the [ ▌◄◄ ] key once to re-play the current message.
Press the [ ▌◄◄ ] key twice to play the previous message.
] key to delete the current message.
42 – ENGLISH