Kodak EasyShare Printer Dock Plus Series 3 User Manual page 45

Example of an Ad-Hoc network:
Adding your printer dock to a Wi-Fi wireless network
1 Open the accessory door on the printer dock.
IMPORTANT: Insert card only as shown. Do not force the card into the card slot.
Notched corner
3 Make sure the printer driver from the included Kodak EasyShare software CD is
installed on your computer (see
computer with the USB cable (see
www.kodak.com/go/support
Using the wireless features of your printer dock
2 Orient the Kodak Wi-Fi
the card into the card slot to seat the connector.
The card slot light blinks as the printer dock scans for
available networks. Once connected, the card slot light
glows steady.
NOTE: When properly inserted, the card sticks out slightly, serving as
an antenna for receiving Wi-Fi signals.
■ To remove the card, push it in, then release it.
When the card is partially ejected, pull it out.
page 22), then connect the printer dock to your
page 24).
®
card as shown, then push
38