Kodak EasyShare Printer Dock Plus Series 3 User Manual page 57

Problem
Printing stops during
mid-print
(paper stops
feeding, and Paper
light may blink)
Print is smudged
Print is spotted
www.kodak.com/go/support
Cause and/or solution
IMPORTANT:
Use only Kodak color cartridge & paper kits for your printer
dock. Do not use inkjet paper.
■
Check the paper:
1
Remove the paper tray
2
Check the paper slot on the back of the printer dock.
3
Remove loose paper from the printer dock. If paper is jammed,
see page 49.
4
Inspect the paper supply: make sure removable tabs have not
been detached from the paper. Reload with new paper if
necessary.
5
Carefully "fan" the paper to keep the sheets from sticking
together.
6
Reload the paper tray. Do not exceed the fill line.
7
Re-install the paper tray, then press
■
Clean the paper feed roller
■
Fingerprints may be on glossy side of paper. Handle paper by the
edges or by the removable tabs
■
Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe
clean. For excessive dirt or debris, thoroughly clean the paper tray,
and load new paper
if necessary (page
NOTE: When storing paper, remove and close the paper tray and paper tray door to keep
dust and debris from collecting on the paper or inside the printer dock
(page 7).
(page 46).
(page
(page 6). Check and clean the paper feed roller
46).
Troubleshooting
to resume printing.
5).
(page 5).
50