Kodak EasyShare Printer Dock Plus Series 3 User Manual page 72

Troubleshooting
Bluetooth button/light
Light status
Light glows steady
blue
Light is off
Picture Size lights
Light status
One light glows steady
green
All lights are off
65
Cause
The Bluetooth radio is on; the printer dock
is ready to receive Bluetooth signals.
The Bluetooth radio is off; the printer dock
is unable to receive Bluetooth signals.
Cause
The indicated picture size is
available and selected.
There are no pictures in the camera,
on the memory card, or on the
PictBridge compatible camera or
device.
The camera is not docked, a
compatible Kodak card reader or
PictBridge compatible camera or
device is not connected, or a
memory card is not inserted.
The camera is not properly seated
on the connector.
The camera, card reader, or
PictBridge compatible camera or
device is transferring pictures to the
computer, or has established an
active connection to the computer.
Action/solution
None required.
To turn the Bluetooth radio on
or off, press the Bluetooth
button, .
Action/solution
None required.
To change picture size, press
the Picture Size button
repeatedly.
To enable the picture size
option:
1
Take pictures.
2
Dock the camera or
connect a compatible
Kodak card reader
(page 14) or PictBridge
compatible camera or
device (page
a card reader, make sure
a memory card is inserted.
Reseat the camera on the
printer dock
None required.
www.kodak.com/go/support
12). If using
(page 8).