Printing From The Internal Card Reader - Kodak EasyShare Printer Dock Plus Series 3 User Manual

Printing without a computer

Printing from the internal card reader

Use the built-in card slot to print pictures directly from your SDIO, SD, or MMC
memory card.
1 Open the accessory door on the printer dock.
IMPORTANT: Insert the card only as shown. Do not force the card into the card slot. Do
not insert or remove a card when the printer dock is transferring pictures
(see
Notched corner
To remove the card, push it in, then release it. When the card is partially ejected,
■
pull it out.
Purchase an SD or MMC card and other accessories at a retailer of Kodak products, or
visit www.kodak.com/go/accessories.
13
page 26) or if the card slot light is blinking.
2 Orient the SDIO, SD, or MMC card as shown, then
push the card into the card slot to seat the
connector.
■
NOTE: If the memory card contains pictures tagged for printing,
IMPORTANT: To avoid paper misfeeds or jams, wait until
■
To print the current picture, press the Print
button, .
instead of printing the current picture, all tagged pictures are
printed (see page 15).
printing is complete before removing
paper, the paper tray, the color cartridge, or
the camera.
To exit without printing, press the Cancel
button, .
www.kodak.com/go/support