Scanning To A Computer - Kodak OFFICE HERO 6.1 Extended User Manual

Scanning

Scanning to a computer

76
To scan to a computer:
1. Load the original(s) (see
2. Press Scan on the printer control panel.
3. Select Scan to Computer, then press OK.
4. Press to select an option, then press
Scan
Option
Scan To USB-connected
Computer
(default)
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
Original 1-sided (default)
2-sided
Scan What Document
(default)
Photo
Destination
File
(default)
Application
(available only when
Home Center
Software is installed
on computer)
Save as No / Yes
Defaults
5. Press Start Black to make a black-and-white scan, or press Start Color to make
a color scan. The scanned file appears at the destination you specified.
www.kodak.com/go/aiosupport
Loading originals for scanning, page
Settings
The scanned file is sent to the USB-connected
computer.
The scanned file is sent to the computer on the
wireless or Ethernet network.
Original document is printed on one side
Original document is printed on both sides of
the page. Select this only if you are scanning
both sides of the page and have loaded the
document into the ADF.
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the printer control panel, page
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the printer control panel, page
Sends the scanned file in the format and to the
location on your computer that you designate.
Sends the scanned file to Home Center
Software.
To save the settings as the new default, press
OK. With Yes selected, press OK.
75).
or to change the setting.
Description
72).
72).