Kodak OFFICE HERO 6.1 Extended User Manual page 91

Connecting to
Internet telephone
service
(Voice-Over-Internet
Protocol or VOIP)
If you have Internet telephone service, you should already have a cable
modem/router connected to the cable outlet with a coaxial cable. You will also need
an Analog Telephone Adapter (ATA) to connect your printer for faxing.
NOTE: Sometimes the cable modem/router has a built-in ATA. Contact your cable
telephone service provider for more information.
1. Connect an RJ-45 (also called CAT 5) cable from the cable modem/router to the
WAN port on the Analog Telephone Adapter (ATA).
2. Connect one end of the phone cord that came with the printer (RJ-11 telephone
cord) to one of the phone input ports on the ATA and the other end to the LINE
IN port on the back of your printer.
Cable outlet
Coaxial
cable
RJ-45 cable
(CAT 5 cable)
www.kodak.com/go/aiosupport
KODAK OFFICE HERO 6.1 All-in-One Printer
Analog Telephone
Adapter (ATA)
Cable
modem/router
RJ-11
telephone cord
85