Scanning To A Computer - Kodak HERO 5.1 Extended User Manual

Scanning to a computer

To scan to a computer:
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Press to select Scan , then press OK .
3. Select Scan to Computer, then press OK.
4. Press to select an option, then press
Scan
Option
Scan To USB-connected
Computer
(default)
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
Scan What Document
(default)
Photo
www.kodak.com/go/aiosupport
Settings
The scanned file is sent to the USB-connected
computer.
The scanned file is sent to the computer on the
wireless or Ethernet network.
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the control panel, page
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the control panel, page
KODAK HERO 5.1 All-in-One Printer
or to change the setting.
Description
71).
71).
74