Adjusting The Settings And Copying A Photo - Kodak OFFICE HERO 6.1 Extended User Manual

Copying

Adjusting the settings and copying a photo

68
To copy a photo using settings other than the default settings:
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
Do not load photos in the Automatic Document Feeder (ADF).
IMPORTANT:
2. Close the scanner lid.
3. Press Home.
4. Press to select Copy Photo, then press OK.
5. Press to select an option, then press
Copy Photo Option
Quantity
Copy Size
Plain Paper Quality
www.kodak.com/go/aiosupport
or
Settings Description
1 (default) to 99 The number of copies that print.
2 x 3 The printer enlarges or reduces the
original to make it the copy size you
3.5 x 5
select.
4 x 6 (default)
If the selected copy size is smaller
4 x 7
than the paper in the paper tray, the
4 x 8
printer automatically arranges the
5 x 7
pictures to best fit the paper size.
4 x 12
8 x 10
8.5 x 11 or A4
Normal Good quality output; prints faster than
(default) Best.
Best The highest quality, but the slowest
print speed.
Draft The fastest print speed, but the lowest
quality.
to change the setting.