Kodak OFFICE HERO 6.1 Extended User Manual page 38

Online Printer Management Tool
Setting scan settings for scan to network folder
32
When you send a scan to network folder, the printer uses defaults that you set up
under scan settings.
1. Select Scan To Network Folder > Scan Settings .
2. Select the scan settings that will be used for all scans sent to a network folder:
NOTE: You can enter a Filename Prefix of your choice.
3. Click Save, then click OK.
You can now send a scan to a network folder from the printer control panel. See
Scanning from the printer control panel, page
www.kodak.com/go/aiosupport
75.