Recording Settings - Pioneer XV-DVR9H Operating Instructions Manual

15 The Initial Setup menu
DVD Menu Language
• Default setting: w/Subtitle Language
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Some multilingual discs have disc menus in several
languages. This setting specifies in which language the
disc menus should appear. Leave on the default setting
for menus to appear in the same language as your
Subtitle Language—see Subtitle Language on page 109.
Choose Other if you want to specify a language other
than those listed (see Selecting 'Other' languages below).
Subtitle Display
• Default setting: On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When set to On, the system displays subtitles according
to the Subtitle Language and Auto Language settings.
Set to Off to switch subtitles off altogether (although you
may find that some discs override this setting). Set to
Assist Subtitle to have the system display the extra
assistive subtitles recorded on to some DVD discs.
Selecting 'Other' languages
1 Select 'Other' from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
2 Select the language you want.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
• Select by language name: Use the
right) buttons to change the language.
110
En
OSD Language w/Subtitle Language
Audio Language English
Subtitle Language French
Auto Language German
DVD Menu Language Italian
Subtitle Display
Spanish
Other
OSD Language On
Audio Language Off
Subtitle Language Assist Subtitle
Auto Language
DVD Menu Language
Subtitle Display
OSD Language DVD Menu Language
Audio Language
Language
English
Subtitle Language
Auto Language Number
0 5 1 4
DVD Menu Language DVD Menu Language
Subtitle Display
(cursor left/
• Select by code number: Press
use the number buttons to enter the four-digit
language code.
See Language code list on page 137 for a list of available
languages and corresponding codes.
3 Press ENTER to confirm and exit the screen.

Recording settings

Manual Recording
• Default setting: Off
Initial Setup
Basic Manual Recording
Tuner Optimized Rec
Video In/Out Navi Mark
Audio In Auto Chapter (Video)
Audio Out Frame Accurate
Language DVD-RW Auto Init.
Recording
Playback
On the default setting there are four different recording
time/picture quality settings, FINE, SP, LP and EP. If you
want to create a custom setting, switch on Manual
Recording and select one of the 32 manual settings.
When recording, you can select your Manual Recording
setting using the REC MODE button.
1 Select 'On (go to setup)' to display the manual
recording setting screen.
HDD Remain 30h33m
EP LP
MN 9 (4h00m/DVD) 2.60Mbps
2 Use the (cursor left/right) buttons to
change the manual recording level.
• You can also use the
between levels MN1, MN9, MN21 and MN32.
• To preview the recording quality, press
down) and select Preview. To return to the level
adjust screen, press ENTER.
3 Press ENTER to set the manual recording level
and return to the menu screen.
Note
• The preset picture quality settings correspond to the
following manual settings: FINE: MN32, SP: MN21,
LP: MN9, EP: MN1.
• See Manual recording modes on page 136 for detailed
information on the manual recording levels.
(cursor down) then
On (go to setup)
Off
Pr 5
DVD Remain 2h00m
SP FINE
Preview
and buttons to cycle
(cursor