Connecting An External Decoder Box (1) - Pioneer XV-DVR9H Operating Instructions Manual

16 Other connections

Connecting an external decoder box (1)

If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this
page.
Important
• Do not connect your decoder box directly to this system.
• Information from the decoder box (for example, relating to pay TV services), is only viewable when this system is
off (in standby).
• For timer recording to work properly on this system, the VCR/satellite receiver/cable box must also be switched on
during recording.
• It is not possible to watch one TV program and record another using this setup.
• Do not connect this system 'through' your VCR, satellite receiver or cable box to your TV.
1 Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
2 Use a SCART cable to connect your decoder box
to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
instructions.
118
En
SCART AV
CONNECTOR
4
TV
IN OUT
VHF/UHF ANTENNA
L
IN
OUT
AV 2 (LINE1/ DECODER)
R
ANALOG AUDIO
FM UNBAL AM IN
75Ω LOOP
AM/FM ANTENNA
CONTROL USE ONLY WITH S-DVR727H SW
SCART AV
CONNECTOR
Decoder box
Antenna/cable TV
wall outlet
AV 1 (RGB) - TV
AC IN
OUT IN
OPTICAL DIGITAL AUDIO
3
2
SCART AV
CONNECTOR
VCR/Satellite receiver
ANTENNA
/Cable box
IN
1
3 Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2(LINE 1/DECODER) AV
connector.
4 Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.