Pioneer XV-DVR9H Operating Instructions Manual page 104

15 The Initial Setup menu
2 Select your country.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
3 Press ENTER to start downloading.
After downloading has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Tip
• If the channel tuning information is updated in the
TV, the system will automatically download the new
information.
Manual CH Setting
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
1 Select 'Manual CH Setting', then 'Next Screen'.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Press ENTER to go to the country setting screen.
2 Select your country.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
104
En
Auto Channel Setting
Auto Channel Setting Auto Channel Setting
Manual CH Setting
Country
UK
Channel Swapping
Set VIDEO Plus+ CH
Downloading Pr 5
Cancel
Auto Channel Setting
Next Screen
Manual CH Setting
Channel Swapping
Set VIDEO Plus+ CH
Manual Channel Setting
Auto Channel Setting
Manual CH Setting Manual Channel Setting
Country UK
Channel Swapping
Set VIDEO Plus+ CH
3 Press ENTER to go to the manual channel setting
screen.
Use the CHANNEL +/– buttons or the number buttons to
change the channel preset (Pr).
Skip
CH System
Channel
AFT
Level
Sound System
Name
Decoder
From this screen there are eight parameters you can set:
• Skip – If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the Skip setting to On.
• CH System – Set the channel system used in your
area or region.
• Channel – Change the channel number assigned to
the current preset.
• AFT (Auto Fine Tune) – When set to On, the station is
automatically tuned; set to Off to manually fine tune
(see below).
• Level – With AFT set to Off, adjust the Level to find
the best sound and picture quality.
• Sound System – Set the sound system used for the
current channel.
• Name – Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER.
• Decoder – If the current channel is scrambled,
requiring a decoder connected to the AV2(LINE 1/
DECODER) connector, set this to On. (See also AV2/
L1 In on page 106.)
Channel Swapping
The preset swap feature lets you swap the channel
assignments of different programs. This is so that you
can group together station presets which naturally go
together.
1 Select 'Channel Swapping'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In Set VIDEO Plus+ CH
Audio Out
Language
Recording
Playback
Pr 1
Off
Western Euro
2
On
B/G
Off
Next Screen