Pioneer XV-DVR9H Operating Instructions Manual page 102

15 The Initial Setup menu
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Use the
the value in the highlighted field.
Use the
from one field to another.
Input Line System
• Default setting: 625System
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
For standard PAL or SECAM recording, leave the input
line system to 625System. When recording an NTSC or
PAL–60 signal through an external input, change to
525System.
Note
• When the current input is a built-in tuner channel
preset, changing the input line system will usually
also affect the input line system of the AV2(LINE 1/
DECODER) input. However if the AV2/L1 In setting is
set to Decoder (see AV2/L1 In on page 106), then the
L2 input is affected instead.
• If when this setting is changed, the screen goes
blank (due to incompatibility with your TV), you can
switch back by pressing and holding the front panel
– button then pressing
while the DVD/HDD is stopped.
• When you switch the Line Input System setting the
Copy List is erased. If you switch the setting using the
– button and
there is no confirmation, so please use with care.
• You can't mix recordings of different TV line systems
on the same disc.
• When you change this setting, the Input Colour
System setting also changes (see Input Colour
System on page 106).
102
En
Manual Clock Setting
Clock Setting Clock Setting
Input Line System
Date THU 01 01 2004
On Screen Display
Front Panel Display Time
00 00
Power Save
Time Zone England
Setup Navigator
London
Summer Time On
(cursor up/down) buttons to change
(cursor left/right) buttons to move
Clock Setting 525System
Input Line System 625System
On Screen Display
Front Panel Display
Power Save
Setup Navigator
STOP (also front panel)
STOP buttons as described above,
On Screen Display
• Default setting: On
2/2
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the system shows on-screen
operation displays (Play, Stop and so on). Change to Off
to hide these displays.
Front Panel Display
• Default setting: On
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the time is shown in the front
panel display when the system is in standby. Switch to
Off to have the front panel display switch off completely
when in standby.
Note
• When set to Off, the display still lights dimly in
standby when setting a timer recording, or during
Auto Start Recording.
Power Save
• Default setting: Off
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When set to Off, signals arriving at the ANTENNA IN
terminal and at the AV2(LINE 1/DECODER) AV
connector are passed through to the ANTENNA OUT
terminal and to the AV1(RGB)-TV AV connector,
respectively, when the system is in standby.
You can cut the standby power consumption of the
system by turning off the through function for one or both
terminals:
Initial Setup
Clock Setting On
Input Line System Off
On Screen Display
Front Panel Display
Power Save
Setup Navigator
Initial Setup
Clock Setting On
Input Line System Off
On Screen Display
Front Panel Display
Power Save
Setup Navigator
Initial Setup
Clock Setting
Mode1
Input Line System Mode2
On Screen Display Off
Front Panel Display
Power Save
Setup Navigator