Pioneer XV-DVR9H Operating Instructions Manual page 53

Recording
3 Press ENTER.
The display shows the timer settings:
Date Start time End time
channel.
• If CODE ERROR appears in the display, check that
the PlusCode programming number is correct and
that the guide channel is set (see Set VIDEO Plus+
CH on page 105), then set the timer recording again.
• If CAN'T SET appears in the display, it means that
although you entered a valid PlusCode programming
number, the program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
ST –
HOME
MENU
REC
ì
Moving the end time by 30-minute blocks
1 During timer recording with the input function
set to HDD/DVD, press and hold ì REC for three
seconds.
The timer indicator disappears from the front panel
display.
Press ì REC repeatedly to extend recording in 30
2
minute increments.
Programming a new end time
Note that it is only possible to program a new end time for
a timer recording when VPS/PDC is off.
HDD and Recording
TUNE +
ST +
ENTER
TUNE –
NAVI MARK
1 With the function set to HDD/DVD, press HOME
MENU and select 'Timer Recording' then 'Timer
Recording (View)'.
Timer Recording
Date Start Stop
5/7 MON 7:00 8:00
EVERY TUE 9:00 10:00
New Input
HDD Remain
DVD Remain
2 Use the (cursor up) button to highlight the
current timer recording ('Recording' is shown in the
'VPS/PDC' column), then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
Timer Recording
Date Start
5/7 MON 7 00
Rec to Group
HDD GROUP1
3 Set a new Stop time for the timer recording.
Use the (cursor left/right) buttons to select the
hour or minute field, then use the
buttons to change the time.
4 Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
CH Mode Rec to VPS/PDC
Pr 3 FINE HDD Recording
Pr 5 FINE HDD On
--h--m(FINE)
1/1
0h43m(FINE)
Stop CH Rec Mode
8 00 Pr 3 FINE
VPS/PDC
OFF Program Set
Ttl Name Input
(cursor up/down)
06
53
En