Recording From An External Component - Pioneer XV-DVR9H Operating Instructions Manual

Recording
• When scanning a DVD, no sound is output if the DVD
is also being recorded (see Scanning discs on
page 36).
• You can't use this feature during Auto Start
Recording, or in Auto Start Recording standby (the
AUTO indicator is lit in the front panel display).
• You can't use simultaneous playback and recording
while copying or backing up.
• During recording or in timer recording standby, you
can't play an HDD title, DVD or Video CD/Super VCD
disc if the Input Line System setting doesn't match
the TV line system of the disc/HDD title (see also
Input Line System on page 102). Also, during
simultaneous recording and playback, if the TV line
system of the playback track/title changes then
playback will automatically stop.
Recording from an external
component
VR mode Video mode HDD
You can record from an external component, such as a
camcorder or VCR, connected to one of the system's
external inputs.
HDD DVD
1 Make sure that the component you want to
record from is connected properly to this system.
See Other connections on page 115 for connection
options.
2 Press HDD to record to the hard disk drive, or
DVD to record to a DVD.
3 Press VIDEO INPUT repeatedly to select one of
the external inputs to record from.
There are two analog inputs and a DV digital input. The
current input is shown on-screen and in the front panel
display:
• L1 – Line 1 (Auto Start Rec)
• L2 – Line 2 (front panel)
• DV – DV input (front panel)
Check that the Audio In settings for External Audio,
Bilingual Recording and DV Input are as you want them
(see Audio In settings on page 107).
VIDEO INPUT
REC MODE
06
55
En