Pioneer XV-DVR9H Operating Instructions Manual page 52

06 Recording
1 Press HDD or DVD.
2 Press 'VIDEO Plus+' to display the VIDEO Plus+
program screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then
VIDEO Plus+).
VIDEO Plus+
PlusCode#
Rec Mode
Rec Times
Rec to
VPS/PDC
• Use the number buttons to enter the PlusCode
programming number. (To clear the last digit
entered, press CLEAR.)
• Press REC MODE to select FINE, SP, LP, EP or AUTO
(See Recording time and picture quality on page 45). If
Manual Recording is on, then you can also select the
MN setting—see Manual Recording on page 110.
• Use the
Once, Daily or Weekly recording option.
• Press HDD to record to the hard disk drive, or DVD to
record to a DVD.
• Use the
or Off.
3 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven't set up the guide channels (or at least
the guide channel for the PlusCode programming
number that you entered), the system will prompt you
to enter the channel number that the TV program is
showing on.
52
En
3 9 9 2 4 0 9
to input
REC MODE to change
MN21
to change level
Once Daily Weekly to change
HDD HDD DVD to change
Off to change
(cursor left/right) buttons to select the
and buttons to switch VPS/PDC On
VIDEO Plus+ programming with the power
off
You can enter a PlusCode programming number when
the system is in standby. Note that the recording is
always made to the HDD. If you want to record to a DVD
disc, you'll need to switch on the power and use the full
VIDEO Plus+ program screen.
VIDEO Plus+
PREV NEXT
ì
Important
• You can't use this feature until you have set up the
guide channels. See Set VIDEO Plus+ CH on
page 105.
• You can't change the recording mode.
• You can't program daily or weekly timer recordings.
1 Press 'VIDEO Plus+'.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode
programming number.
P L US CODE
2 Use the number buttons to enter the PlusCode
programming number.
• To clear the last digit entered, press CLEAR.
/ NEXT
• Use the PREV
PDC on/off. With VPS/PDC on, the front panel VPS/
PDC indicator lights. (Note that a maximum of eight
timer recordings can be set with VPS/PDC on.)
CLEAR
ENTER
2 9 32 4
button to switch VPS/