Connecting Multiple Monitors Via Mst (Multiple-Stream Transport) - BenQ DesignVue PD Series User Manual

3. Go to KVM Switch > USB and select None. This is because two video inputs are
displayed simultaneously and require no switch. The None option will switch USB control
only.
4. Press a custom key (if it has been set as the hot key for KVM Switch) or go to the KVM
Switch menu to switch.
Scenario C: Working with KVM and MST at the same time
USB-C in control
(DP MST)
Input 1: USB-C
Input 2: DP + USB Upstream
1. Connect the computer and two monitors properly and enable MST as instructed in
necting multiple monitors via MST (Multiple-Stream Transport) on page
2. Make sure the USB-C™ and DP sources are properly connected to the first monitor as
illustrated or as instructed in
3. Go to System > Power Awake and make sure it is set to ON.
4. Press the custom key 2 (as the hot key for Input by default) or go to the KVM Switch
menu to switch
MST function works only when the video is input via DP.
Connecting multiple monitors via MST (Multiple-Stream
Transport)
With connection via the DP-IN and DP-OUT ports, you can output content to one or up to 4
monitors via MST function.
1. Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP
cable. Select YES to enable USB-C™ power delivery in monitor standby mode if you are
Establishing KVM connections on page
DP to DP cable
Switched to be DP in control
(DP MST)
34.
DP to DP cable
or
TM
USB-C cable
How to adjust your monitor
Con-
37.
LAN
37