Power Delivery Of Usb-C™ Ports On Your Monitor - BenQ DesignVue PD Series User Manual

Power delivery of USB-C™ ports on your monitor
With the power delivery function, your monitor helps supply power to the connected
USB-C™ devices. Available power varies by port. Make sure the devices are connected to the
appropriate ports to be activated properly with sufficient power.
(on the rear of the monitor)
• A connected device needs to be equipped with a USB-C™ connector that supports charging
function via USB power delivery.
• The connected device can be charged via USB-C™ port even when the monitor is in power
saving mode.(*)
• The USB power delivery is up to 65W. If the connected device requires more than the
delivered power for operation or for boot up (when the battery is drained), use the original
power adapter that came with the device.
• The information is based on the standard testing criteria and is provided for reference. The
compatibility is not guaranteed as the user environments vary. If a separately purchased
USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with
power delivery and video / audio / data transfer functions.
*: Charging via USB-C™ in monitor power saving mode is available when the Power Awake function is enabled.
Go to System > Power Awake and select ON.
USB-C™ 65W
5V / 3A
9V / 3A
12V / 3A
15V / 3A
20V / 3.25A
PD2506Q
USB-C™
(on the left side of the monitor)
5V / 0.9A
N/A
N/A
N/A
N/A
Getting to know your monitor 17