BenQ DesignVue PD Series User Manual page 53

Item
USB-C Sets the refresh rate of the input video via USB-C™ port.
Configuration The USB transmission speed changes accordingly due to
USB-C™ technology limitation.
USB 3.2
Gen 1
USB 2.0
Power Awake By default, this function is disabled, and the USB ports are not
supplied with power while the monitor is in standby mode.
To keep supplying power to the USB ports in monitor's
standby mode, change the setting to ON.
MST Allows data transmission while multiple monitors are
daisy-chained.
Advanced DDC/CI
Auto Power
Off
DisplayPort Selects an appropriate DP standard for data
OSD Key
Bri.
AMA
Function
Refresh rate: 2560 x 1440 @ 60Hz
USB transmission speed: 5 Gbps
Refresh rate: 2560 x 1440 @ 60Hz
USB transmission speed: 480 Mbps
Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
Sets the time to power off the monitor
automatically in power saving mode.
transmission.
Adjusts the brightness of the power key's LED
indicator.
Improves the gray level response time of the
LCD panel.
Range
• ON
• OFF
• ON
• OFF
• ON
• OFF
• OFF
• 10 min
• 20 min
• 30 min
• 1.1
• 1.4
• ON
• OFF
• OFF
• High
• Premium
Navigating the main menu 53