BenQ DesignVue PD Series User Manual page 35

3. After the connections are made properly, the KVM Switch function is enabled
automatically. You can find out the status from the OSD menus.
B-C DisplayPort
DisplayPort HDMI
SB
None
Switching to different video sources
Once the KVM connections have been made properly, you can press the default hot keys to
cycle through available KVM sources easily. The way to switch KVM may vary by the way the
sources are connected. You are recommended to follow the instructions in different scenarios
from page 36 to switch quickly.
Switch by the custom key 2 on the rear of the monitor
The custom key 2 is set to Input (Signal Input) by default. If KVM Switch is enabled, the
Input hotkey menu will be marked with a KVM icon. Press the key repeatedly to cycle through
available options.
The switch also works if you have set custom key 2 to KVM Switch. Switch of KVM sources by the KVM
Switch hot key is required when you have two monitors and computers as described in
with two computers and two monitors on page
On the main menu, the KVM status
is displayed.
KVM Switch: ON
If KVM is not working
please check:
1. Cables are
connected to both PC
and monitor
2. Change Video Input
selection in third
column
36.
On the Input hotkey menu,
a KVM icon is displayed.
Input
USB-C
DisplayPort
HDMI
1 2
Input
USB-C
DisplayPort
HDMI
1 2
Scenario B: Working
How to adjust your monitor
KVM
KVM
35