BenQ DesignVue PD Series User Manual page 36

Switch from the KVM Switch menu
Go to KVM Switch to manually select a source.
Mode: sRGB
Display
Color
KVM Switch
2
Audio
Custom Key
System
Back
Scenario A: Working with two computers and one monitor
USB-C in control
(USB-C)
1. Establish cable connection to enable KVM function as instructed in
nections on page
2. Go to System > Power Awake and make sure it is set to ON.
3. Press the custom key 2 (as the hot key for Input by default) or go to the KVM Switch
menu to switch.
Scenario B: Working with two computers and two monitors
USB-C in control
(USB-C)
1. Establish cable connection as instructed in
2. Go to System > Power Awake and make sure it is set to ON.
36 How to adjust your monitor
USB-C
DisplayPort
USB
Move Confirm
(DP +
USB Upstream)
34.
(USB upstream)
(DP)
(The KVM Switch hot key)
DisplayPort
HDMI
None
Switched to be DP in control
Switched to be DP in control
Establishing KVM connections on page
KVM Switch: ON
If it can't use KVM,
please check
1. Input Source is
connected
2. Select the correct
physical input source
for USB
Establishing KVM con-
34.