BenQ DV3750 Installation Manual

BenQ DV3750 LCD Display
TV Tuner Installation Guide

Package contents

Check the contents in the package. If any item is missing or damaged,
contact your place of purchase immediately.
• Tuner x1
• Screw x1
Installing the tuner
1. Turn off the LCD display. Disconnect the display from the power outlet
and remove all connected audio and video signal cables.
2. Place the display on a flat and stable surface and then put a piece of dry,
soft and clean cloth in appropriate size in front of the display. Slowly tilt
the display forward against the cloth until the display completely lies
down.
• Plastic cover x1
• Installation guide x1
3. Locate the tuner slot cover on
the display as indicated by the
white circle in the illustration.
4. Remove the tuner slot cover as
shown.
5. Insert the tuner all the way
into the tuner slot. Note the
direction of the tuner when
inserting.