BenQ DesignVue PD Series User Manual page 21

3. Connect the headphone.
You may connect the headphones to the headphone jack.
4. Connect the USB devices.
1. Connect the USB cable between the PC and the monitor (via the upstream USB port). This
upstream USB port transmits data between the PC and the USB devices connected to the mon-
itor. Note that this step is not required if the video source is from the USB-C™ inputs.
2. Connect USB devices via other USB ports (downstream) on the monitor. These downstream
USB ports transmit data between the connected USB devices and the upstream port.
3. If you tend to use KVM switch, see
and mouse (KVM Switch) on page 34
The USB-C™ port on the left or right side works as downstream port and connects with USB devices.
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
Working with two video sources with one set of keyboard
for appropriate connections and more information.
2
2 1
How to assemble your monitor hardware 21