Adjusting Display Mode; Choosing An Appropriate Picture Mode; Connecting The Monitor To Your Macbook Series Product; Connecting Multiple Monitors Via Mst (Multi-Stream Transport) - BenQ AQColor DesignVue PD Series User Manual

Adjusting display mode

To display images of aspect ratio other than 16:9 and size other than the panel size of your
purchased model, you can adjust the display mode on the monitor.
1. Press any of the control keys to bring up the hot key menu. Select
the main menu.
2. Go to
Picture Advanced
3. Select an appropriate display mode. The setting will take effect immediately.

Choosing an appropriate picture mode

Your monitor provides various picture modes that are suitable for different types of images.
See Picture Mode on page 39
Go to
Picture Advanced

Connecting the monitor to your MacBook series product

While the monitor is connected to your MacBook series product, switch to
which represents MacBook's color matching and visual representation on your monitor.
1. Connect your monitor to the MacBook series product.
2. Go to
Picture Advanced
3. Select . The setting will take effect immediately.
M-book
Connecting multiple monitors via MST (Multi-Stream
Transport)
With connection via the DP-IN and DP-OUT ports, you can output content to one or up to 4
monitors via MST function.
System OSD Settings
>
MST ON
> >
System DisplayPort
>
DP 1.2
1. Set the monitor ready for connection. On the monitor, go to
, and select
MST ON
menu can be launched and configured only when input signal is detected.
and
Display Mode
for all the available picture modes.
and
Picture Mode
and
Picture Mode
>
DP cable
. Go to >
System
.
for a desired picture mode.
.
System OSD Settings
>
MST ON
> >
System DisplayPort
> >
DP 1.2
USB cable
(type A to type B)
, and select
DisplayPort
( ) to access
Menu
mode
M-book
DP cable
>
System OSD Settings
. Note the OSD
DP 1.2
How to adjust your monitor
>
33