Delta E Series Software Instructions page 20

Recipe Setting Software Instruction
Modbus
Output
(Delta PLC)
0x08FA
Y0
(M250)
0x08FB
Y1
(M251)
0x08FC
Y2
(M252)
0x08FD
Y3
(M253)
Name
After the machine is started, it will continuously output this signal.
Ready
When the servo press is off, this signal will stop.
Waiting for the trigger signal to press down. This signal will cease
Waiting during the pressing process, and will not restart until the pressing
action is completed.
When the machine has an abnormality and outputs an alarm, this
Alarm
point will continue to output.
When the pressing action is completed, this point signal will be
OK/NG output if the pressing is successful, and this point signal will not be
output if the pressing has failed.
Definition
19