Battery Replacement Notice - HP StorageWorks SAN Switch 2/32 Installation Manual

Regulatory Compliance Notices

Battery Replacement Notice

Your switch is equipped with a lithium manganese dioxide, a vanadium pentoxide, or
an alkaline internal battery or battery pack. There is a danger of explosion and risk of
personal injury if the battery is incorrectly replaced or mistreated. Unless specific
replacement instructions are provided as part of this guide, replacement is to be done
by an HP authorized service provider using the HP spare designated for this product.
For more information about battery replacement or proper disposal, contact your HP
authorized reseller or your authorized service provider.
WARNING: Your switch contains an internal lithium manganese dioxide, a
vanadium pentoxide, or an alkaline battery. There is risk of fire and burns if the
battery is not handled properly. To reduce the risk of personal injury:
Batteries, battery packs, and accumulators should not be disposed of with the general
household waste. In order to forward them to recycling or proper disposal, please use
the public collection system or return them to HP, your authorized HP partners, or
their agents.
C–4
• Do not attempt to recharge the battery.
• Do not expose to temperatures higher than 140°F (60°C).
• Do not disassemble, crush, puncture, short external contacts, or
dispose of in fire or water.
SAN switch 2/32 version 4.0.x installation guide