13. If you are not using multi-pathing software, vary on the disk volume groups. The
proper usage would be varyonvg <volume_group_name>. For example,
varyonvg datavg
14. If you are not using multi-pathing software, mount all devices again and restart
I/O. For example,
mount /mnt/jbod
15. If you are using multi-pathing software, re-enable the affected path.
16. Repeat for all fabrics.
SAN switch 2/32 version 4.0.x installation guide
Updating the Core Switch PID Format
B–9
B–9