Table of Contents
Advertisement
K2, K3-CAN connectors
These connectors are of the "Canon 9 male" type. The pinout is following:
Pin 2: CANL
Pin 7: CANH
Note: All the other pins are left unconnected.
K5, K6, K7-RS232 interfaces
These connectors are of the "Canon 9 female" type. The pinout is following:
1: NC
2: RX
3: TX
4: DTR (Reset)
5: GND
6: DSR
7: RTS
8: CTS
9: NC
K17-PC/AT keyboard connector
This connector is of the "DIN-5" type:
1: CLOCK
2: DATA
3: NC
4: GND
5: VCC
K19-USB connector
The type of the USB connector is "B series". This allows connecting the board
to a PC computer using a standard USB cable.
1: VBUS
2: D-
3: D+
4: GND
5: SHLD
Note: None of the USB interface parts are mounted on the board by
default.
2
1
3
4
52
52
52
52
Advertisement
Table of Contents
