Fujitsu DevKit16 User Manual page 23

Table of Contents

Advertisement

Insert following code into main function located in main module:
void main(void)
{
/* enable PC keyboard in FPGA
*(__far byte *)0xEBUL|=0x10;
/* enable ExtInt bean
Button_Enable();
/* loop */
for(;;);
}
Then double-click on the Beans | Button:ExtInt | OnInterrupt item in
the project panel tree and the event's handling routine will be selected in
the editor. Drag&drop methods NegVal from beans GreenLED and
RedLED into ButtonOnInterrupt event routine using mouse:
void ButtonOnInterrupt(void)
{
RedLED_NegVal();
GreenLED_NegVal();
}
Compile.
Select command main menu | Tools | Make or press F9 to
run internal make. Make uses Softune command line tools to compile
and link generated and user code.
Note: Processor Expert requires to save all files in internal editor. You
can do this unis command editor local menu | File | Save or press
Ctrl+S. If you check option main menu | Options | Environemnt
Options | Autosave file before running codesign or external tool
Processor Expert saves all files automatically.
Debug
. Check the settings of jumpers on the DevKit16, connect your PC
with your DevKit16 board using serial cable, connect power supply to
DevKi16 and select command main menu | Debug | Start Debug. If you
find any problem with initialization of the debugger please refer to debugger
documentation: open Cpu Inspector - page Debugger and press F1.
Note: You can check option: main menu | Options | Environment Options |
Successful make or build automatically start PE Debug to start debugger
automatically after make or build.
*/
*/
21
21
21
21

Advertisement

Table of Contents
loading

Table of Contents