Language Selection - Teac DV-C200 Owner's Manual

DVD
Subtitle Language Selection
Note
< This function can only be used for DVD discs on which subtitles
have been recorded in multiple languages.
While playing a DVD disc, press the SUBTITLE button repeatedly to
select a desire language for subtitle. The subtitle is displayed in the
new language immediately.
Notes
< Some DVDs display subtitles automatically, and cannot be turned
off even if you set the subtitle function to off. Foreign films shot in
different languages have such permanent subtitles.
< During some scenes, the subtitles may not appear immediately
after you turn them on.
< Some DVDs allow you to make subtitle selections and turn
subtitles on or off only via the disc menu. Use the g/t/5/b
buttons and the ENTER button.
< The maximum number of subtitle languages stipulated by the
manufacturers is 32/32.
< You can set a preferred language for subtitle in the SETUP menu,
see page 18.

Language Selection

DVD
Audio Language Selection
Note
< This function can only be used for DVD discs on which audio has
been recorded in multiple languages.
While playing a DVD disc, press the LANGUAGE button repeatedly
to select a desired language for audio. Playback then continues in
new language.
Notes
< Some DVDs allow you to change audio selections only via the
disc menu. Use the g/t/5/b buttons and the ENTER button.
< The maximum number of audio languages stipulated by the
manufacturers is 8/8.
< You can set a preferred audio language, see page 18.
Depending on some VCD and DVD discs, you may be able to change
the audio format (including audio coding type, number of channels
recorded and audio language) using the LANGUAGE button. The
relevant message appears on the TV display as shown below.
31