Time Select - Teac DV-C200 Owner's Manual

DVD/VCD/CD
You can search by inputting the time code.
The time code corresponds to the approximate actual playing time.
For example, to search for a scene 2 hours 30 minutes 20 seconds
past the beginning, key in 02:30:20.
Note
< This function is not available for CD and MP3.
< You may not be able to do this function depending on the DVD
disc.
If the playing disc is DVD
Title and Chapter Select
1 Press the GOTO button. The following menu appears on the TV
screen.
2 Use the h or G button to select title number or chapter
number.
Use the numeric buttons (0~9) to input the title or chapter number
you want.
3 Press ENT button to play your selection.

Time Select

1 Press the GOTO button twice to enter time menu shown as
below.
28
Time Select
2 Use the numeric buttons (0~9) to input the time code you want.
For example, key in 0, 1, 2, 3, 4, 5.
3
Press ENT button to start playing from the point.
Notes
< If the title number, chapter number or time code you input does
not exist in the disc, the system will not execute your selection
and the selecting menu will exit.
< The selection menu will time out after a few seconds if you do not
input valid number.
If the playing disc is Video CD or CD
1 Press the GOTO button.
The time menu appears on the TV screen.
2 Use the numeric buttons (0~9) to input the time code you want.
For example, key in 0, 1, 2, 3.
When the last digit is input and the time code is valid, the system
starts playing from the point.
Note
< The GOTO feature is not work with PBC functions.