Picture Zooming; Angle Selection - Teac DV-C200 Owner's Manual

Picture Zooming

DVD/VCD
The ZOOM feature is not available on some discs.
1
Press the ZOOM button on the remote control during normal,
slow or still (pause) playback.
2 If you press the ZOOM button repeatedly, the magnification level
increases each time. Three magnification levels are supported.
On each press of the ZOOM button, the following message will
appear on the TV screen.
ZOOM X1.5
ZOOM X2
ZOOM X3
ZOOM OFF
Notes
< If you press the g/t/5/b buttons, the zoom point shifts,
allowing you to pan the zoomed picture.
< Some discs may not respond to the zoom feature.
< Zooming does not work on subtitles or menu screens included on
DVDs.
< The magnification level varies depending on the TV DISPLAY
selection in the SETUP menu.
30

Angle Selection

DVD
Some DVD discs contain scenes which have been shot
simultaneously from a number of different angles. For these discs,
the same scenes can viewed from each of the different angles. (The
recorded angles differ from disc to disc.)
1 While playing a title shot from different angles, the angle mark
appears on the TV screen. You can turn off the on-screen angle
mark by changing the system settings, for details, see page 17.
2 Press the ANGLE button to change the scenes from one angle to
other angle(s).
selected angle / recorded number of angles
Note
< The maximum number stipulated by the manufacturer is 9/9.
: 1/4
: 2/4
: 3/4
: 4/4