Setting 1 - Teac DV-C200 Owner's Manual

This chapter describes how to set and how to adjust your DV-C200
settings using the SETUP menu. Most settings and adjustments are
required to be set when you first use the system.
Using the SETUP Menu
Using the SETUP menu, you can do the initial setup, adjusting the
picture, etc. you can also set a language for the subtitles and the
OSD, limit playback by children, etc.
Notes
< Some settings are in the chapter of Basic Setup, see the relevant
pages.
< All settings in the SETUP menu are not used when Tuner or AUX
is selected.
< "PREFERENCES" cannot be selected when a disc is playing.
1 Press the SETUP button to enter SETUP menu.
Select the main item you want using the 5/b buttons, and then
press the ENT button.
SETUP MENU - - MAIN PAGE
GENERAL SETUP
16
GENERAL SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP

Setting 1

2 Select the sub-item you want using the 5/b buttons.
Press the t button to go to the right option list.
Select the setting item using the 5/b buttons, then press the
ENT button to confirm your selection.
GENERAL SETUP
NORMAL TV PAN SCAN
< Use the g/t/5/b buttons and the ENT button to select and set
other items.
< Use the numeric buttons(0-9) to key in numbers, such as the
password for parental control.
3
Press the SETUP button again to exit menu.
- - GENERAL PAGE - -
TV DISPLAY NORMAL / PS
TV TYPE NORMAL / LB
ANGLE MARK WIDE
OSD LANG
SCR SAVER
MAIN PAGE
- - GENERAL PAGE - -
TV DISPLAY NORMAL / PS
TV TYPE NORMAL / LB
ANGLE MARK WIDE
OSD LANG
SCR SAVER
MAIN PAGE