Program Playback - Teac DV-C200 Owner's Manual

VCD/CD
Program Play
This feature uses On Screen Menus. Make sure your TV is
connected and turned on prior to attempting to use Program Play.
You can play the contents of the disc in the order you want by
arranging the order of the tracks on the disc and create your own
program. One program can be stored in the system and can contain
up to 99 tracks.
Note
< This function is not available for DVD and MP3 disc.
< You cannnot do program playback during PBC playback of Video
CD.
1 In stop mode, press the PROGRAM button to enter program
registration mode.
The programming display appears on the TV screen and the front
panel display.
Program play indicator lights up
on the front panel display
2 Use the numeric buttons (0~9 / +10) to key in the track numbers in
the order you want. If the track number is more than 10, use +10
button.
If the programmed numbers have reached the maximum limit
(P99:--) and you key in track number again, the "FULL" indicator
will appear on the TV screen and the front panel display.
3 When you have completed your program registration, press the
PLAY/PAUSE button (G/J) to start the program play.

Program Playback

Programmed
Track
numbers
number
Note
< If you press the STOP button (H) or buttons not used in the
program registration mode, the system will interrupt and exit the
program setting.
< The program remains even after the program play ends. Providing
you do not turn off the power, when you press the PLAY/PAUSE
button (G/J), you can play the same program again.
< You can repeat play the programmed tracks.
During program play, press the REPEAT button.
< If one of the following buttons is pressed, the program will be
cleared:
POWER switch on the remote
POWER switch on the DV-C200 itself
STOP button (H) in the stop mode
< When the total elapsed time goes over 99:59, there are occasions
when the wrong time is displayed.
27