Remote Control Unit - Teac DV-C200 Owner's Manual

Connecting Antennas 2
FM Indoor Antenna
If you live reasonably close to a transmitter and want to use the
provided lead-type FM antenna, you will have to connect it direct to
the "FM 75Ω" socket.
Fit the metal sleeve of the lead-type antenna over the core (center)
conductor of the "FM 75Ω" socket, extend the lead and fix it to a
window frame or wall with thumbtacks, or the like, where reception
is best.
Lead-type FM Antenna(75Ω) (provided)
FM Outdoor Antenna
In an area where FM signals are weak, it will be necessary to use a
75-ohm unbalanced-type outdoor FM antenna using the optional
matching transformer, as shown. Generally, a 3-element antenna
will be sufficient; if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5 or more
elements.
If you live in an area where radio stations are provided by your
Cable Company, you can connect a 75 ohm cable directly from your
cable system to the FM 75 ohm antenna input jack.
Outdoor FM Antenna (75Ω)

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be erratic if there are any
obstacles between the unit and the remote control.
< If the remote control unit is operated near other appliances which
generate infrared rays, or if other remote control devices using
infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other appliances may operate incorrectly.
Battery Installation
Remove the battery compartment cover.
1
Insert two "AAA" (R03, UM-4) dry batteries. Make sure that the
2
batteries are inserted with their positive "+" and negative "_"
poles positioned correctly. (Extended life batteries such as
Alkaline will extend the time between battery changes
significantly.)
Close the cover.
3
Battery Replacement
If the distance required between the remote control unit and main
unit decreases, the batteries are getting weak. In this case replace
the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the remote
control unit to prevent them from leaking. If they leak, wipe away
the liquid inside the battery compartment and replace the
batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
13