Listening To The External Sources - Teac DV-C200 Owner's Manual

Basic Operation 2
Using the Sleep Timer
You can set the system to turn off automatically at a specified time.
1 Press the SLEEP button while the power is on.
Each time you press the SLEEP button, the time changes as
shown below.
120 (minutes) w 110 w 100 w 90 w 80w 70 w 60 w 50 w
40 w 30 w 20 w 10 w OFF w 120 w...
When you have specified the time, the "Sleep" indicator lights on
the front panel display.
2
You can check the remaining time before the system turns off.
Press the SLEEP button. The remaining time appears on the front
panel display for a few seconds.
3D Surround Sound
To enjoy 3D surround sound from your left and right speakers, press
the 3D button.
Press the 3D buton again to off.

Listening to the External Sources

If other audio component(s), such as a cassette player or MD
player, are connected to this system (see page 11), you can select
that external component by:
1 Press the AUX button.
2 Operate the unit connected to this system.
3 Adjust the volume level by pressing the VOLUME/CONTROL
buttons (+/–).
21