4. LCN (Logical Channel Number)
Set LCN on or off.
Picture Setting
First, press the SETUP button. Access the Picture Setting menu by navigating to the Picture tab with
the LEFT/RIGHT buttons. Press UP/DOWN to select an option and press OK or RIGHT to adjust that
setting. Press the EXIT button to exit the Menu.
1. Aspect Ratio
Change this setting if the picture does not appear to fit the screen correctly.
AUTO: This setting will automatically select the best ratio to match the broadcast
picture with your TV.
The following choices are also available: 4:3 Full, 4:3 Pan& Scan, 4:3 Letter Box,
16:9 Wide Screen.
Note: Press the YELLOW button in TV viewing mode to cycle through aspect ratio.
2. Resolution
Change this setting if the picture resolution does not appear to be correct.
This setting is to match the most common settings if a HDMI cord is used.
480P: for NTSC system TV.
576i: for PAL system TV.
576P: for PAL system TV.
720P: for NTSC or PAL system TV.
1080i: for NTSC or PAL system TV.
3. TV format
If the picture does not appear correctly, you need to change the settings. This should match the most
common setting for TVs in your country.
NTSC: for NTSC system TV.
PAL: for PAL system TV.
Channel Search
First, press the SETUP button. Access the Channel Search menu by navigating to the Channel
Search tab with the LEFT/RIGHT buttons. Press UP/DOWN to select an option and press OK or
RIGHT to adjust that setting. Press the EXIT button to exit the Menu.
10