Table of Contents
Advertisement
1997 Guitar Regional Training
F
RONT
M
S
IDDLE
5
6
5.
VOLUME Knob
This knob adjusts the signal volume output from the MIX OUT jack. The center marking provides an easy refer-
ence setting when connecting to an instrument amp or mixer.
* The output level from the GUITAR OUT jack is controlled separately.
6.
STRING SELECT Knob
When making changes in 1ST/2ND tone assignment (LAYER), transposition (TRANSPOSE), and other settings
of individual strings, use this knob to designate the which string is to be set.
7.
EDIT TARGET Dial
This dial is used for determining which of the eight "targets" (groups of settings) — 1ST TONE, TONE MIX,
EFFECT, and the like — is to have settings acted upon. This dial has no effect other than in the Edit mode.
8.
PARAMETER SELECT Dial
This dial is used for determining which of the groups [A] to [D] will have its settings acted upon. It is also used
in other procedures such as adjusting pickup sensitivity and saving tones.
This dial generally has no effect outside of Edit mode, but in the Play mode, only "PATCH INC/DEC BY S1/S2"
can be selected when the dials turned completely clockwise. When it is in this position, you can go up and down
through sequences of patch numbers just by using the "S1/S2" buttons on the guitar controller (GK-2A).
4
P
T
ANEL
ECTION
OUR CONT
7
.
8
Advertisement
Table of Contents
