Roland GR-30 Manual page 4

Guitar synthesizer

Hide thumbs Also See for GR-30:

Table of Contents

EDIT/PLAY Button

This button switches between the Play mode and the Edit mode.

Pressing the button while you are in the Play mode switches the GR-30 to the Edit mode, enabling each dial to

select various settings, and allowing you to create and save sounds, adjust sensitivity, and so on. Pressing the but-

ton again returns the unit to the Play mode.

PATCH (VALUE) Buttons [+] / [-]

In the Play mode (status at start-up), press these buttons to go through the different patches (tones) in sequence.

In the Edit mode, press the buttons to change the settings values or options selected with the dials.

Pressing the [+] button once increases the setting value by one. When the button is held down, the value continues to

change. If you then hold down the [-] button at the same time, the speed of this change increases. Press the buttons

in the reverse fashion to cause the values to decrease.

The [+] and [-] buttons are also used in other tasks, including writing to patches, setting the Effect Time Off, calling

up the Tuner, and so on.

OTES

GR-30 Guitar Synthesizer

Table of Contents