Advertisement
Quick Links
Connecting the GA-FC EX/GA-FC to the KATANA Mk II
Connections
Connect the GA-FC jack on the KATANA Mk II with a stereo cable.
A stereo cable must be used.
Switching Between Operating Modes on the GA-FC EX/GA-FC
Press the [EFFECTS] switch on the GA-FC EX/GA-FC to switch between the operating modes of the GA-FC EX/GA-FC.
To switch between function modes, keep the [EFFECTS] switch pressed down for at least one second.
EFFECTS indicator
Unlit
Lit
Blinking
GA-FC EX
GA-FC
Using an Expression Pedal and Footswitch
Connect an expression pedal (FV-500L, FV-500H, and Roland EV-5; sold separately) to control the volume and other parameters with your foot.
If a footswitch (FS-5U; sold separately) is connected, you can use it to switch between the TONE SETTING's BANK A/B, or to set the delay time (TAP).
or
Mono cable
* Use only the specified expression pedal (FV-500L, FV-500H, and Roland EV-5; sold separately). By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.
© 2022 Roland Corporation
Operating mode
Channel select
EFFECTS ON/OFF
FUNCTION
Amp
EFFECTS indicator
EFFECTS indicator
Mono cable
or
GA-FC EX only
To use a third expression pedal, set the [MODE] switch to "EXP PEDAL 3" (only
on amps for which the GA-FC EX is supported).
1
Advertisement
Related Manuals for Roland GA-FC EX
Summary of Contents for Roland GA-FC EX
- Page 1 Using an Expression Pedal and Footswitch Connect an expression pedal (FV-500L, FV-500H, and Roland EV-5; sold separately) to control the volume and other parameters with your foot. If a footswitch (FS-5U; sold separately) is connected, you can use it to switch between the TONE SETTING’s BANK A/B, or to set the delay time (TAP).
- Page 2 Connecting to a Second Amp (Amp 1 and Amp2) GA-FC EX only When the [MODE] switch on the GA-FC EX is set to “FOOT CONTROL 2”, you can connect a second amp (only amps that are compatible with the GA-FC EX).