Information On Colour System; Colour System Set - JVC HR-DVS2EU Instructions Manual

Mini dv/s-vhs video cassette recorder
Hide thumbs Also See for HR-DVS2EU:
Table of Contents

Advertisement

INFORMATION ON COLOUR SYSTEM

Colour
System Set
(VHS Deck Only)
1
2
1
4
7
1
2
NOTES:
About NTSC Playback
Some TVs shrink the picture vertically and place black bars at
the top and bottom of the screen. This is not a malfunction on
the part of either the video recorder or the TV.
The picture may roll up and down. This can be corrected
using the V-HOLD control found on some TVs. (This cannot
be corrected if the TV does not have a V-HOLD control.)
The counter and tape remaining time readings will be
incorrect.
During search, still, or frame-by-frame playback, the picture
will be distorted, and there may be a loss of colour.
Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.
2
3
5
6
3
8
9
4
4
MENU
0
OK
3
You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this recorder. Follow the procedure
below to select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on this recorder;
MESECAM is the designation for tapes with SECAM signals that have
been recorded on a MESECAM-compatible PAL video cassette
recorder.
TURN ON THE RECORDER
1
Press
.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS VHS MODE SET
SCREEN
3
Press %fi to move the
highlight bar (pointer) to
"VHS MODE SET", then
#
press OK or
.
SELECT COLOUR SYSTEM
MODE
4
Press %fi to move the
highlight bar (pointer) to
"COLOUR SYSTEM", then
#
press OK or
to select the
appropriate colour system.
a- PAL/NTSC: To record PAL signals, or play back a
PAL or NTSC tape.
b- MESECAM: To record SECAM signals, or play back a
MESECAM tape.
It is not possible to record in S-VHS if "MESECAM" is
selected. The recording mode is forced to change to
VHS.
If "MESECAM" is selected when the tape speed is set
to EP mode, the tape speed will be forced to change
to LP mode.
It is not possible to select EP mode if "MESECAM" is
selected.
RETURN TO NORMAL
SCREEN
5
Press MENU.
17
EN
MAIN MENU
MODE SET
VHS MODE SET
DV MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[5 ∞ ] =
[MENU] : EXIT
VHS MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO SP=LP TIMER
OFF
DIGITAL 3R
ON
S-VHS
ON
COLOUR SYSTEM PAL/NTSC
DIGITAL TBC/NR
ON
VIDEO STABILIZER
OFF
[5∞] =
[MENU] : EXIT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-dvs2u

Table of Contents