Information On Colour System; Colour System Set - JVC HR-J258E Instructions Manual

12
EN
Colour
System Set
1
4
7
1
MENU
NOTES:
About NTSC Playback
Some TVs shrink the picture vertically and place black bars at
the top and bottom of the screen. This is not a malfunction on
the part of either the video recorder or the TV.
The picture may roll up and down. This can be corrected
using the V-HOLD control found on some TVs. (This cannot
be corrected if the TV does not have a V-HOLD control.)
The counter and tape remaining time readings will be
incorrect.
During search, still, or frame-by-frame playback, the picture
will be distorted, and there may be a loss of colour.
Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.
2 3
2
5 6
8 9
0
4
?
OK

INFORMATION ON COLOUR SYSTEM

You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this recorder. Follow the procedure
below to select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on this recorder;
MESECAM is the designation for tapes with SECAM signals that have
been recorded on a MESECAM-compatible PAL video cassette
recorder.
TURN ON THE RECORDER
1
Press
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to place the
pointer next to "MODE
SET", then press OK or
SELECT COLOUR SYSTEM
MODE
4
Press %fi to place the
pointer next to "COLOUR
SYSTEM", then press OK
or to select the
appropriate colour system.
a- PAL/NTSC: To record PAL signals, or play back a
b- MESECAM: To record SECAM signals, or play back a
"AUTO SP LP TIMER" appears only with the HR-
J458E.
RETURN TO NORMAL
SCREEN
5
Press MENU.
.
MODE SET
.
AUTO CH SET
MANUAL CH SET
INITIAL SET
[5 ∞ ] =
[MENU] : EXIT
AUTO TIMER
O. S. D.
B. E. S. T.
AUTO SP=LP TIMER
POWER SAVE
AV2 SELECT
COLOUR SYSTEM PAL/NTSC
[5∞] =
[MENU] : EXIT
PAL or NTSC tape.
MESECAM tape.
MAIN MENU
MODE SET
OFF
ON
ON
OFF
OFF
AV2