Page 1: Table Of Contents
Mini DV/S-VHS VIDEO CASSETTE RECORDER HR-DVS2EU CABLE/SAT LCD PROG AUDIO – –:– – TV/VCR VPS/PDC DAILY/QTDN. WEEKLY/HEBDO 0000 MENU ENTER/ENTREE PROG 30 SEC START STOP DATE DEBUT EXPRESS INSERT A.DUB COPIE DV IN/OUT ENTREE/SORTIE DV INSTRUCTIONS FIRST AUTO SET-UP ON BACK...
Page 2: Safety First
Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.
Page 3 For Italy: "It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.'95" The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off.
Page 4: Installing Your New Recorder
Basic Connection TV Aerial Cable 21-pin SCART connector RF Cable (provided) 21-pin SCART Cable (provided) Rear view AV1 (L-1) IN/OUT ATTENTION: Your TV must have a 21-pin AV input connector (SCART) for the connection to the recorder. INSTALLING YOUR NEW RECORDER It's essential that your video recorder be properly connected.
Page 5: S-Video Connection
S-VIDEO Connection Aerial or Cable ANTENNA IN AV1 (L-1) IN/OUT ENTREE/SORTIE ANTENNA ANTENNE ENTREE IN/DECODER AV2 (L-2) ENTREE/DECODEUR SORTIE ANTENNA OUT To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . . CONNECT RECORDER TO a– Connect the aerial, recorder and TV as per "Basic Connection"...
Page 6: Initial Settings
Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set International Telephone Country Code BELGIUM : 32 NORGE ESKÁ REPUBLIKA : 42 ÖSTERREICH DANMARK : 45 POLSKA DEUTSCHLAND : 49 PORTUGAL ESPAÑA : 34 SUISSE GREECE : 30 SUOMI ITALIA : 39 SVERIGE MAGYARORSZÁG...
Page 7: Select Language
SELECT LANGUAGE Press OK. The Language Set display appears on the front display panel and/or on the screen. If you are referring to the front display panel Press % ﬁ to select your language code. Language Code ENGLISH : 01 NEDERLANDS : 06 DEUTSCH : 02...
Page 8: Preset Download
Preset Download You can use this function only with the TV offering T-V Link, etc.* * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully- wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.
Page 9 Results of Auto Set Up/Preset Download appear on the front display panel When both auto channel set and auto clock set have been completed success- fully the correct current time will be displayed after the OK button is pressed in step 4 on page 7 or in step 1 on page 8.
Page 10: Language
Language Turn on the TV and select the AV mode. This recorder offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically ( setting manually using this procedure as required. MENU INITIAL SETTINGS (cont.) pg.
Page 11: On-Screen Displays
On-Screen Displays Turn on the TV and select the AV mode. NOTES: When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting. During playback, the operation mode indicators may be disturbed depending on the type of tape being used. The superimposed indication on the TV screen tells you what the recorder is doing.
Page 12: Power Save Mode
Power Save Mode Turn on the TV and select the AV mode. You can reduce the power consumption while the recorder is turned off. MENU NOTES: During Power Save, the display panel will be turned off. The Just Clock function ( Power Save mode is engaged.
Page 13: Satellite Receiver Control
SATELLITE RECEIVER CONTROL Satellite Receiver Control Setting The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the S timer programming ( timer programming ( pg. 36) starts, the recorder sets its input mode to "L-2"...
Page 14 NUMBER Setting satellite receiver's brand and channel After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. Turn on the TV and select the AV mode. TURN ON SATELLITE RECEIVER Turn on the satellite receiver’s power. ACCESS MAIN MENU SCREEN ON RECORDER Press MENU.
Page 15 NUMBER SATELLITE RECEIVER BRAND CODE AMSTRAD 60, 61, 62, 63, 91 CANAL + D-BOX ECHOSTAR ECHOSTAR (VIA DIGITAL) FINLUX FORCE GALAXIS 69, 88 GRUNDIG 64, 65 HIRSCHMANN ITT NOKIA JERROLD KATHREIN 70, 71 LUXOR MASCOM MASPRO NOKIA PACE 67, 86, 91 PANASONIC PHILIPS 66, 84...
Page 16: T-V Link Functions
"TV Auto Power On" of T-V LINK functions is not possible with the DV deck. VCR Auto Standby You can use your TV's remote control to turn off the recorder. For details, refer to the instruction manual for your TV.
Page 17: Information On Colour System
INFORMATION ON COLOUR SYSTEM Colour System Set (VHS Deck Only) NOTES: About NTSC Playback Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV. The picture may roll up and down.
Page 18: Playback
If the erase protection switch is set to "SAVE", playback begins automatically. It takes about 15 seconds until the playback picture appears. Also make sure the VCR indicator appears on the front display panel. If not, press TV/VCR on the remote control to turn on the VCR indicator.
Page 19: Playback Features
Playback Features PLAY ATTENTION (VHS Deck Only) Picture may not appear during high-speed search with an LP/EP-recorded tape. In the high-speed search, still, slow motion or frame by frame playback mode, the picture will be distorted, and there will be a loss of colour. Noise may appear or the picture may appear distorted with an EP-recorded tape during still, slow motion, frame-by-frame playback or variable-speed search.
Page 20: Skip Search
Clean the video heads using a dry cleaning cassette (TCL-2UX for the VHS deck/ M-DV12CLAU for the DV deck) when: "USE CLEANING CASSETTE" appears on the screen (only with "O.S.D." set to "ON" ( pg. 11)). VHS Deck Rough, poor picture appears while a tape is played back. The picture is unclear or no picture appears.
Page 21: Instant Review
Instant ReView (VHS Deck Only) Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them. NOTE: Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
Page 22: Video Stabilizer
Repeat Playback (VHS Deck Only) Your video recorder can automatically play back the whole tape 100 times repeatedly. START PLAYBACK Press PLAY. ACTIVATE REPEAT PLAY- BACK Press PLAY and hold for over 5 seconds, then release. The Play indicator ( ) on the display panel blinks slowly.
Page 23 Digital 3R (VHS Deck Only) Digital 3R picture system applies edge correction to the luminance signal to enhance detail. ACCESS MAIN MENU SCREEN Press MENU. ACCESS VHS MODE SET SCREEN Move the highlight bar (pointer) to "VHS MODE SET" by pressing %ﬁ, then press OK or SELECT DIGITAL 3R SET MODE...
Page 24 Tape Position Indicator (VHS Deck) The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of "5" in relation to "0" (beginning) or "+" (end) shows you where you are on the tape. "O.S.D."...
Page 25 Soundtrack Selection (DV Deck) The DV recording deck is capable of recording two soundtracks (L and R) and will play back the one you select. During Playback Pressing AUDIO on the remote control changes the soundtrack being played back as follows: TRACK On-Screen Display For stereo or Bilingual tapes...
Page 26: Recording
Basic Recording Turn on the TV and select the AV mode. NUMBER RECORD Accidental erasure prevention VHS/S-VHS To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape. VHS Deck VHS record indicator SP/LP/EP...
Page 27 DV record indicator NUMBER RECORD Accidental erasure prevention Mini DV To prevent accidental recording on a recorded cassette, set its erase protection switch to "SAVE". To record on it later, set the switch to "REC". DV Deck LOAD A CASSETTE Insert a Mini DV cassette with the erase protection switch set to "REC".
Page 28: Record One Programme While Watching Another
Recording Features RECORD Record One Programme While Watching Another SELECT CHANNEL TO WATCH Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view. – –:– – Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (VHS) or to 120 minutes (DV) (selectable in 30-min.
Page 29: Tape Remaining Time
Retake (VHS Deck Only) You can cut out unnecessary parts of a TV programme while you're recording it. End of programme Beginning of programme Unnecessary Unnecessary Programme part part Recorded part Go back to end of programme to cut out unnecessary part ENGAGE RECORD-PAUSE MODE...
Page 30 AUDIO 0000 Super VHS ET (S-VHS ET) — Recording on VHS cas- settes with S-VHS quality (VHS Deck Only) You can record in SP mode on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back on a recorder equipped with the S-VHS ET function.
Page 31: Bilingual Programmes
Elapsed Recording Time Indication (VHS Deck Only) You can check the exact time of a recording. SET COUNTER DISPLAY Press – –:– – until a counter reading appears on the display panel. RESET COUNTER Press 0000 before starting recording or playback. The counter is reset to "0:00:00"...
Page 32: Picture System
B.E.S.T. Picture System (VHS Deck Only) Turn on the TV and select the AV mode. RECORD The B.E.S.T. (Biconditional Equalized Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures.
Page 33 Recording START RECORDING Press and hold RECORD and press PLAY on the remote, or press RECORD on the recorder. DURING B.E.S.T. B.E.S.T. COMPLETE The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording. NOTES: The B.E.S.T. system works for both SP and LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated.
Page 34: Timer Recording
Programming Before performing the S Make sure that the recorder's built-in clock is set properly. Select the recording deck by pressing VHS or DV. Insert a VHS (or S-VHS) cassette with the safety tab in place, or a Mini DV cassette with the erase protection switch set to "REC".
Page 35: Timer Warning
IMPORTANT Make sure the channel position number you wish to record is displayed; if not, see "S Setup" on page 67 and set the Guide Program number for that S If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid S If the "GUIDE PROG SET"...
Page 36: Express Timer Programming
Express Timer Programming Before performing Express Timer Programming: Make sure that the recorder's built-in clock is set properly. Select the recording deck by pressing VHS or DV. Insert a VHS (or S-VHS) cassette with the safety tab in place, or a Mini DV cassette with the erase protection switch set to "REC".
Page 37 ENTER CHANNEL POSITION Press PR +/–. SET TAPE SPEED Press SP/LP/EP ( ) to set the tape speed. It is not possible to select EP mode if "COLOUR SYSTEM" is set to "MESECAM". ( (VHS deck only) SET VPS/PDC MODE Press VPS/PDC to select "ON"...
Page 38 VPS/PDC START+/– NOTE: You can also check the programmes on the display panel even if the recorder's power is off (unless the recorder is in the Power Save mode pg. 12) or the recorder is in the Timer mode; however, it is not possible to cancel or replace the programmes. Check, Cancel And Replace Programmes SP/LP/EP...
Page 39 PROG START+/– ATTENTION If the programme you have just made and "DV" are START STOP CH DATE blinking, there is a conflicting 8 : 00 10 : 00 programme on the DV deck. 2 10 : 00 10 : 45 3 11 : 30 13 : 00 4 22 : 00 23 : 00 Press %ﬁ...
Page 40: Auto Timer
Auto Timer When the Auto Timer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. MENU NOTE: For safety, when Auto timer is set to "OFF", all other recorder functions are disabled while the Timer mode is engaged.
Page 41 MENU Auto SP → LP Timer (VHS Deck Only) If, when timer-recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. For Example . . . Recording a programme of 210 minutes in length onto a 180- minute tape Approximately 150 minutes...
Page 42: Special Features
NUMBER "4" Remote A/B/C/D Code Switching The remote control is capable of controlling four JVC video recorders independently. Each of recorders can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals.
Page 43 TV/VCR +/– IMPORTANT Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability. TV BRAND NAME AIWA...
Page 44 Although the provided remote control unit is compatible with 60, 61, 62, 63, 91 JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability.
Page 45: Editing
EDITING Preparation For Editing (VHS Deck Only) Turn on the TV and select the AV mode. Advantages Of S-VHS Video Recorders You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS. From VHS to S-VHS: Record VHS playback signals in the S-VHS mode.
Page 46: Tape Dubbing
Tape Dubbing Dubbing An Entire Cassette Because this recorder includes both a VHS deck and a DV deck, you can easily use it for dubbing without connecting any other equipment. SP/LP/EP NOTES: If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy.
Page 47: Normal Dubbing
Normal Dubbing NOTES: There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts. The on-screen display during the operation or dubbing is not recorded. When dubbing from the VHS deck to the DV deck, also set "SOUND MODE"...
Page 48: Random Assemble Editing
Random Assemble Editing 64-program Editing Memory (8 programmes x 8 scenes) By using the Random Assemble Editing function, you can select up to 8 scenes from a previously recorded Mini DV cassette and automatically dub them onto a VHS cassette. Random Assemble Editing is possible only when dubbing from the DV deck to the VHS deck.
Page 49 RECORD NOTES: When Random Assemble Editing doesn't work, press → of the DUB button, then perform Random Assemble Editing again. To cancel the registered scene, press pressed, the latest registered scene is erased. When the source tape has more than 2 identical time codes pg.
Page 50: Edit From A Camcorder
When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.
Page 51 DV Camcorder EDIT B If the camcorder has an S-VIDEO output connector... AUDIO input PAUSE connector Player Mini-Plug Cable (not provided) (JVC camcorder only) PAUSE connector Mini-Plug Cable (not provided) (JVC camcorder only) AUDIO input Recorder S-VIDEO input Audio Cable...
Page 52: Edit To Or From Another Video
Edit To Or From Another Video Recorder NUMBER "0" You can use your video recorder as the source player or as the recording deck. EDITING (cont.) MAKE CONNECTIONS Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 53.
Page 53 TV Receiver (AV mode) Player 21-pin SCART Cable (not provided) Recorder TV Receiver (AV mode) Recorder S-Video Cable (not provided) 21-pin SCART Cable (not provided) Another recorder Player NOTES: All necessary cables can be obtained from your dealer. For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T.
Page 54: Dv Vhs
Audio Dubbing CD Player etc. Audio mixer Original sound AUDIO OUT NUMBER "0" PLAY VHS Audio Dubbing Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Audio dubbing is not possible with a cassette recorded in EP mode.
Page 55 AUDIO PLAY PAUSE ENGAGE AUDIO DUBBING Press A. DUB. Your recorder enters the Audio Dubbing Pause mode. (" " blinks, " " and " " light up on the front display panel.) To perform audio dubbing with audio mixing, press AUDIO on the remote control to select "HIFI L or "L R"...
Page 56: Insert Editing
Insert Editing Recorder Audio/Video signal Another recorder Player NUMBER "0" NOTE: Insert Editing is not possible with a Mini DV tape recorded in LP mode. VHS Insert Editing Insert Editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged.
Page 57 0000 STOP NOTES: Once the Insert Editing starts, you can not use the other deck. All necessary cables can be obtained from your dealer. Insert Editing cannot be performed on a VHS/S-VHS cassette that has had its record safety tab removed, or on a Mini DV cassette that has had its erase protection switch set to "SAVE".
Page 58 L-1 OUTPUT/INPUT Setting The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set "L-1 OUTPUT" and "L-1 INPUT" to the appropriate mode depending on the type of appliance connected to the recorder's AV1 (L-1) IN/OUT connector.
Page 59 VHS F-1 INPUT Setting Set "VHS F-1 INPUT" to the appropriate mode depending on the connector (VIDEO or S-VIDEO input connector) being used on the front panel. Press MENU to access the Main Menu screen. Press %ﬁ to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or Press %ﬁ...
Page 60: System Connections
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.
Page 61 Perfect Connections This is an example of recommended connection if your TV has two 21-pin AV input (SCART) connectors. Connect the decoder to the satellite receiver's connector if you have a decoder, AV1 (L-1) IN/OUT connector to TV's connector, and AV2 (L-2) IN/DECODER connector to the satellite receiver's connector.
Page 62: Connecting/Using A Decoder
Connecting/ Using A Decoder TV Aerial Cable RF Cable (provided) AV1 (L-1) IN/OUT AV2 (L-2) IN/DECODER Decoder SYSTEM CONNECTIONS (cont.) The AV2 (L-2) IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.
Page 63: Connecting/Using A Stereo System
Connecting/ Using A Stereo System Stereo Amplifier Speaker Television ANTENNA ANTENNE ENTREE SORTIE Rear View MAKE CONNECTIONS Connect the AUDIO OUT L and R connectors on your video recorder to the AUX IN or TAPE MONITOR terminals on your stereo system’s receiver or amplifier. NOTES: When connecting your recorder’s audio output connectors to a stereo amplifier, make sure you connect L and R correctly.
Page 64: Connecting To A Video Titler
Connecting To A Video Titler S OUT AV2 (L-2) IN/DECODER 21-pin SCART Cable (provided) S-Video Cable (not provided) Video Titler NUMBER "0" PLAY RECORD SYSTEM CONNECTIONS (cont.) When you edit from the DV deck to the VHS deck (or from the VHS deck to the DV deck), you can enter a title to a scene by connecting a video titler.
Page 65 PLAY RECORD START PLAYBACK Press DV or VHS for the playing deck, then press PLAY. START RECORDING Press DV or VHS for the recording deck, then press RECORD at the point from where you want to start recording. ENTER TITLE Enter a title at the point where you want the title to be displayed.
Page 66: Connecting To A Printer
Connecting To A Printer DV IN/OUT DV cable (not provided) To DV IN connector PLAY SYSTEM CONNECTIONS (cont.) You can make printouts of video images by connecting the GV-DT1/GV-DT3 Digital Printer (sold separately) to the DV IN/OUT connector. Your recorder Digital printer MAKE CONNECTIONS Connect the printer’s DV IN connector to the recorder’s...
Page 67: Subsidiary Settings
SUBSIDIARY SETTINGS IMPORTANT Normally, Auto Set Up ( pg. 6), Preset Download ( automatically. You need to set the Guide Program Numbers manually only in the following cases. When timer-programming with the S on your recorder, is not selected or when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place.
Page 68: Tuner Set
Tuner Set Turn on the TV and select the AV mode. IMPORTANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set — you have moved to a different area or if a new station Your recorder needs to memorize all necessary stations in channel positions in order to record TV programmes.
Page 69 IMPORTANT In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly, when you timer-record a TV programme using the system, the recorder will record a TV programme of a different station.
Page 70: Input Channel
NUMBER Storing Channels Manually Store channels that were not stored during Auto Set Up pg. 6), Preset Download ( pg. 8) or Auto Channel Set pg. 68). ACCESS MAIN MENU Press MENU. ACCESS CONFIRMATION SCREEN Press %ﬁ to move the highlight bar (pointer) to "MANUAL CH SET", then press OK or tion screen appears.
Page 71: Delete A Channel
Delete A Channel Perform steps 1 and 2 of "Storing Channels Manually" on page 70 to access the Confirmation screen before continuing. SELECT ITEM Press % ﬁ until the item you want to delete begins blinking. DELETE CHANNEL Press The item directly beneath the cancelled one moves up one line.
Page 72 Set Stations (A) Set station names that are registered in your recorder. MENU SUBSIDIARY SETTINGS (cont.) Perform steps 1 and 2 of "Storing Channels Manually" on page 70 to access the Confirmation screen before continuing. SELECT ITEM Press %ﬁ until the item you want begins blinking. ACCESS MANUAL CHANNEL SET SCREEN Press OK twice.
Page 73 MENU Set Stations (B) Set station names other than the ones registered in your recorder. Perform steps 1 and 2 of "Storing Channels Manually" on page 70 to access the Confirmation screen and then perform step 1 and 2 of "Set Stations (A)" on page 72 before continu- ing.
Page 74: Tv Station And Id List
TV Station And ID List STATION NAME 1000 TV1000 3SAT 3SAT ADLT ADULT ANT3 ANTENA3 ARTE ARTE BBC GROUP BBC1 BBC1 BBC2 BBC2 BAYERN3 CANAL PLUS PORTUGUSES CAN5 CANALE5 CANV KETNET CANVAS CHANNEL4 CHANNEL5 CHLD CHILD CINE CINEMA CLUB TELECLUB CSUR ANDALUCIA DISC...
Page 75 MENU Fine-Tuning Channels Already Stored Perform steps 1 and 2 of "Storing Channels Manually" on page 70 to access the Confirmation screen before continuing. SELECT CHANNEL TO FINE-TUNE Press % ﬁ until the channel you want to tune begins blinking. ACCESS MANUAL CHANNEL SET SCREEN Press OK twice.
Page 76: Clock Set
Clock Set Turn on the TV and select the AV mode. Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF").
Page 77 MENU SET JUST CLOCK The default setting is "OFF". Set as desired by pressing %ﬁ, then press OK or For the Just clock function, If you set to "OFF", you can disregard the next step as you won’t be able to receive regular clock adjustments. SET CLOCK DATA SOURCE CHANNEL POSITION The recorder is preset to receive clock setting and...
Page 78: Troubleshooting
Set the TV to its AV mode. Try manual tracking. ( pg. 21) Use a dry cleaning cassette (TCL-2UX for the VHS deck/M-DV12CLAU for the DV deck) or consult your JVC dealer. Engage and adjust tracking manually. pg. 21) CORRECTIVE ACTION...
Page 79 RECORDING SYMPTOM 5. Audio dubbing is not possible. 6. Monitoring the audio-dubbed sound is not possible during audio dubbing using the DV deck. 7. The programmed memory of Random Assmble Editing is disappeared. 8. When performing Tape Dubbing, the beginning of the dubbing start point is not dubbed.
Page 80: Other Problems
OTHER PROBLEMS SYMPTOM 1. Whistling or howling is heard from the TV during camcorder record- ing. 2. When scanning channels, some of them are skipped over. 3. The channel cannot be changed. 4. Channel settings that were made manually seem to have changed or disappeared.
Page 81: Questions And Answers
QUESTIONS AND ANSWERS PLAYBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes (VHS deck) or 3 minutes (DV deck) to protect the heads.
Page 82: Index
FRONT VIEW COPIE DV IN/OUT ENTREE/SORTIE DV STANDBY/ON Button Infrared Beam Receiving Window DV EJECT Button pg. 18 Mini DV Cassette Loading Slot DV Button pg. 18 STOP Button pg. 18 PLAY Button pg. 18 PAUSE Button pg. 19 RECORD Button pg.
Page 83: Rear View
Programme Time Indicators "Timer" Indicator Tape Remaining Time Indicator Channel/Clock Display Instant REVIEW Indicator VPS/PDC Indicator S-VHS Indicator VCR Indicator "Cassette Loaded" Mark Counter/Remain Display Mode Display (L-1, L-2, F-1 or SAT) pg. 13 pg. 63 REVIEW pg. 26, 27 pg.
Page 84 6 TV PR +/– Button pg. 43 VHS Button pg. 18 STANDBY/ON Button – – : – – Button pg. 31 TV/VCR Button pg. 43 REVIEW Button pg. 21 Transmit Button pg. 34 WEEKLY Button pg. 35, 37 ‰ Button pg.
Page 85 How To Use The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ( pg. 43, 44) Point the remote control toward the sensor window.
Page 86: Specifications
GENERAL Power requirement : AC 220 V – 240 V`, 50 Hz/60 Hz Power consumption Power on : 33 W Power off : 7.9 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 124 mm x 391 mm Weight : 6.7 kg...
Page 87 MEMO...
Page 88 Auto Set Up The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically. BEFORE YOU START PLEASE MAKE SURE THAT: The TV aerial cable is connected to the ANTENNA IN jack on the rear panel of the video recorder. The video recorder's mains power cord is connected to a mains outlet.

This manual is also suitable for:

Hr-dvs2u

JVC HR-DVS2EU Instructions Manual

Safety First

Installing Your New Recorder

Initial Settings

Satellite Receiver Control

T-V Link

Information on Colour System

Playback

Recording

Timer Recording

Special Features

Editing

System Connections

Subsidiary Settings

Troubleshooting

Questions and Answers

Index

Specifications

Quick Links

Related Manuals for JVC HR-DVS2EU

Summary of Contents for JVC HR-DVS2EU

This manual is also suitable for:

Table of Contents